X
Sulje
WECKMAN STEEL

Row sheet

Row sheets for machine seamed roofs

Weckman offers row sheets for tinsmiths for the construction of machine-seamed roofs. Three different options: galvanised 0.5 and 0.6 mm (DX53 + Z350 MA) and in quality class Premium 50 TINSMITH PRO 0.6 mm – tinsmith quality.

THESE ROW SHEETS SHOULD ONLY BE INSTALLED BY A TINSMITH

Dark grey
RR23

Dark brown
RR32

Black
RR33

TECHNICAL INFORMATION AND ROOF ACCESSORIES

TECHNICAL INFORMATION

DRAINAGE SYSTEM

ROOF SAFETY ACCESSORIES

INSTRUCTIONS

Row sheet

$Nominal effective width (mm))#535
$Nominal seam height (mm)#25
$Raw material#Galvanised 0.5 and 0.6 mm (DX53 + Z350 MA) and 0.5 mm TINSMITH PRO – tinsmith quality.
$Quality class#Premium 50
$Installation#Professional tinsmith
Dimensions according to SFS-EN 508-1 tolerances

GUARANTEED DURABILITY AND SAFETY

Finish your Weckman roof with an impressive and practical drainage system. Trough gutters and gutter pipes are manufactured of hot galvanised steel, which is Pural-coated on both sides. The benefits of the coating are excellent corrosion resistance, good cleanability and durable appearance. Standard colours: white, red, dark grey, dark brown and black .

DIMENSIONS

 

Down pipe
Down pipe set for 3.0-metre eaves, eaves-heights of over 3 metres with extension parts.

Trough gutter

Standard length Standard length 3.0 m, 4.0 m or 5.0 m. Outer bracket and overlap piece as standard.


1

P13 Trough gutter


2

P13 End piece


3

P13 Gutter bracket, short


4

P13 Gutter bracket, long


5

P13 Gutter bracket, angled (1:3; 1:2,5; 1:1,15)


6

P13 Overlap piece


7

P13 Gutter discharge


8

P13 Inner corner


9

P13 Outer corner


10

P10 Upper bend


11

P10 Lower bend


12

P10 Discharge pipe


13

P10 Downspout fastener


14

P10 Diversion


15

P13 Downspout pipe 1.0 m and 2.3 m

SAFE AND DURABLE WECKMAN ROOF SAFETY ACCESSORIES

Wall ladders guarantee safe entry onto the roof. A roof bridge ensures a safe passage on the roof in connection with, e.g., chimney sweeping, snow dropping, antenna installations and other tasks on the roof. Snow breakers are designed to prevent damage caused by snow dropping and to protect the roof coating. All roof safety accessories are reliable and high-quality Finnish products.

LADDERS

Weckman ladders are made of hot galvanised oval tubes without weldings. The steps are round tubes. Wall ladders come in powder-coated or galvanised styles and roof ladders are only available powder-coated.Standard colours for roof and wall ladders: white, red, dark grey, dark brown and black.

ROOF LADDER

Standard lengths 1.5m, 2.4 m, 2.7 m, 3.6 m, 4.2 m, 4.8 m, 5.1 m, 5.4 m, 6.0 m, 6.3 m and 7.2 m. The ladder set includes the ladder frame and wall mounts.

WALL LADDER

Standard lengths 1.5m, 2.4 m, 2.7 m, 3.6 m, 4.2 m, 4.8 m, 5.1 m, 5.4 m, 6.0 m, 6.3 m and 7.2 m. The ladder set includes upper arcs for the ladder frame and wall mounts (for an eaves width of 80–100 cm).

SAFETY LADDER

1.8 m, 2.4 m, 2.7 m, 3.0 m, 3.6m and 4.2 m. Includes the ladder frame and wall mounts.

ROOF BRIDGE

A roof bridge can also be used for the construction of work platforms and stairs on the roof. Weckman roof bridges are safe, have a snow permeation capacity of over 50% and are classified as class 2, allowing the fastening of safety ropes. The roof bridges are powder coated. Roof profile-specific roof mounts. Standard colours: dark grey, red, dark brown, black, tile red.

ROOF BRIDGE

Standard lengths 1.21 m (3 roof mounts), 2.47 m (3 roof mounts) and 2.97 m (4 roof mounts).

SNOW BREAKER

In Finnish conditions, snow breakers are necessary where people pass by.Weckman tube snow breakers are made of hot galvanised steel.The snow breaker is delivered either galvanised or powder-coated.Two oval tubes, four roof mounts according to the roof sheet.Standard colours: dark grey, red, dark brown, black, tile red.

SNOW BREAKER

3000 mm

Weckman quality is ensured by manufacture according to the ISO9001 quality system. Weckman quality can also be identified by the CE certification, as all of our steel products fulfil the requirements of standards SFS-EN 14783:2006andSFS-EN 1090-1:2009+A1:2011. Each of our employees has taken on our goal of keeping work high-quality and faultless. Our load-bearing steel products have VTT approvals and certificates.

ISO-9001-quality system
CE
VTT approvals

WECKMAN PREMIUM 50

LUE LISÄÄ