X
Sulje
WECKMAN STEEL

Grain trailers with walls that can be opened

Grain trailers with walls that can be opened

From our extensive TUHTI selection, you can find just the right trailer for you. High-quality materials and advanced manufacturing techniques guarantee that our trailers retain their durability and functionality even in the most challenging conditions.

  • WS50–WS70 grain trailers have a single-axle frame
  • WS90–WS170 grain trailers have a bogie chassis

FRAME AND TRAILER BED

  • The frame and trailer beds are dip-painted allowing paint to penetrate the frame beams
  • The WS50–WS90 have a solid V frame made of tubular beam
  • The WS110–WS170 trailers have a tubular beam frame with high torsional strength, and the frame beams are also made of tubular beam
  • The WS70–WS170 trailers are equipped with a long drawbar (approx. 1.5 m) that makes the trailer easy to manoeuvre even with twin tyres. The WS170 trailer has a drawbar with springs (mechanical)

MULTI-AXLE CHASSIS

  • High-quality wheel hubs manufactured by FAD
  • Symmetrical bogie with lowered pivot points. The middle axle is lower than the hub axles, allowing the trailer to climb over obstacles easily whether moving forward or backward.
  • Rocker bearings: WS90–WS130 models: ball bearings, WS150–WS170 models: round roller bearings

WALL PANELS

  • Walls are of roll-formed 2 mm Docol 420 steel
  • The walls have a durable powder-coating
  • The lower side walls can be turned down
  • The backboard opens in two sections: either the backboard alone or the backboard and additional backboard together
  • The backboard’s locking mechanism fixes the bottom edge of the backboard to the rear beam at four points
  • The four clamps ensure that the backboard remains secure when driving with a full load
  • A grain hatch is standard in the backboard
  • A tubular ladder outside the trailer and non-fixed steps inside the trailer make it safe to enter
  • 400 mm extension walls as an optional accessory

WALL LENGTH AND HEIGHT

  • The WS50–WS90 trailers have full-length, 400 mm high side walls
  • The WS110–WS150 trailers have 500 mm high two-section side walls
  • The WS170 trailer has 500 mm high three-section side walls
  • The WS50–WS70 trailers have 600 cm high additional walls
  • The WS90–WS170 trailers have 750 cm high additional walls

OTHER INFORMATION

  • Light covers as standard equipment
  • Rotating hitch
  • Sprung hydraulic hose holder with a drawbar

Comparison tables

WS 50

• Single-axle
• Solid V frame made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 4,800 kg
• Trailer bed interior dimensions 363×181 cm
• Trailer bed exterior dimensions 379×196 cm
• Wall height 40/101 cm
• Volume with standard walls 2.7 m³
• Volume with additional walls 6.8 m³
• Volume with extension walls 9.3 m³

WS 70

• Single-axle
• Solid V frame made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 7,000 kg
• Trailer bed interior dimensions 363×211 cm
• Trailer bed exterior dimensions 379×226 cm
• Wall height 40/101 cm
• Volume with standard walls 3.2 m³
• Volume with additional walls 7.9 m³
• Volume with extension walls 11.1 m³

WS 90

• Multi-axle chassis
• Solid V frame made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 9,000 kg
• Trailer bed interior dimensions 363×211 cm
• Trailer bed exterior dimensions 379×226 cm
• Wall height 40/116 cm
• Volume with standard walls 3.2 m³
• Volume with additional walls 9.2 m³
• Volume with extension walls 12.3 m³

WS 110

• Multi-axle chassis
• Rectangular frame with a frame bar made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 11,000 kg
• Trailer bed interior dimensions 401×239 cm
• Trailer bed exterior dimensions 416×254 cm
• Wall height 50/126 cm
• Volume with standard walls 5.0 m³
• Volume with additional walls 12.4 m³
• Volume with extension walls 16.3 m³

WS 130

• Multi-axle chassis
• Rectangular frame with a frame bar made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 13,000 kg
• Trailer bed interior dimensions 452×239 cm
• Trailer bed exterior dimensions 467×254 cm
• Wall height 50/126 cm
• Volume with standard walls 5.6 m³
• Volume with additional walls 14.0 m³
• Volume with extension walls 18.4 m³

WS 150

• Multi-axle chassis
• Rectangular frame with a frame bar made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 15,000 kg
• Trailer bed interior dimensions 505×239 cm
• Trailer bed exterior dimensions 523×254 cm
• Wall height 50/126 cm
• Volume with standard walls 6.2 m³
• Volume with additional walls 15.6 m³
• Volume with extension walls 20.6 m³

WS 50

• Multi-axle chassis
• Rectangular frame with a frame bar made of tubular beam
• Trailer bed runners made of tubular beam
• Capacity 17,000 kg
• Trailer bed interior dimensions 618×239 cm
• Trailer bed exterior dimensions 603×254 cm
• Wall height 50/126 cm
• Volume with standard walls 7.4 m³
• Volume with additional walls 18.6 m³
• Volume with extension walls 24.5 m³
• Volume with walls for animal feed 35.7 m³

Accessories:

  • extension walls (h=400 mm)
  • walls for animal feed WS170-2 (h=1,100/750mm)
  • backboard for gravel
  • tow jaw at the rear
  • protective plates for trailers equipped with walls that can be opened
  • bale frame
  • gated sides