Openable sides with a grain hatch

The design of the sides of the Weckman trailers keeps even finely ground materials tightly confined.

Grain sides and top sides installed on the standard sides make handling of sides easy. When using grain sides, the tailgate has two parts and can be opened completely or partially. The tailgate has a secure 4-point locking mechanism and a lockable grain hatch as a standard. The sides are manufactured out of 2 mm thick Docol 420 steel.

The standard height of the grain trailer sides is 40 or 50 cm, depending on the model. Additional grain or top sides are available as accessories that increase the height of the sides and thus the volume of the platform.

Steps at the front and detachable steps inside the platform bring added comfort and safety.

Rigid frame, spacious bed

Thanks to the torsionally rigid frame and platform, the trailer can withstand even large stresses, which increases the lifespan of the trailer. The frame and platform stringers are made of tubular beams. The thick bottom plate can withstand the loading stresses. All parts of the frame and platform are dip-coated, resulting in a coating that covers also the inside of the tubular beam of the frame, preventing corrosion.

The long towbar (in model WS130 G) improves the turning radius of the trailer also when running on twin wheels. The hydraulic hoses and electric wires run inside the towbar, protected from damage.

A sturdy bogie with high ground clearance

The bogie structure of the trailers is a symmetrical “bogie” in which the middle axle is lower than the hub axles. This enables the trailer to pass over obstacles easily, which helps to keep the load stable during transport. Weckman trailers have high ground clearance, since the sturdy bogie does not need any additional support.